If you’ve noticed that your faucet is leaking, there are several steps you can take to fix it. The first step is to check the faucet’s parts. A few of the most common parts that need repair are the valve seats, O-rings, and washers. O-rings fit snugly around the valve stem, but normal wear and tear can cause them to become loose. In addition, corroded valve seats disrupt the seal, which connects the cartridge to the compression mechanism. In disk cartridge faucets, corroded valve seats are also a common cause of faucet problems. Lastly, a worn or squeaky valve seat can also cause trouble.
To repair a faucet, you first need to know the exact make and model of your faucet. This is very important because every brand has a unique logo. Look for the logo on the handle to identify the brand. Then, look online to find repair instructions and replacement parts. Be prepared to get a little dirty while you’re repairing your faucet. But remember that it’s not impossible if you’re not an expert. If you want it more convenient, you can hire Plumbers to do the job.
Next, remove the stem. Most faucets have a stem that holds the handle. Be careful with aggressive wrenches, as they can damage plumbing parts. If you don’t have a flathead screwdriver, try using a small toothless wrench instead. Once you’ve removed the stem, you’ll need to remove the seat washer and the O-ring. Using penetrating oil on the threads will break up the rust and sediment.
Using a flat-head screwdriver or Allen key, remove the handle from the faucet. Some faucets have decorative caps that cover the screw. To remove them, use a utility knife or a flat-head screwdriver. Next, remove the stem washer and replace it with a new one. If the stem washer is damaged, remove the handle. A new handle and washer will fit in place. If you are unsure of which component to replace, you can contact a professional to repair your faucet.
A new cartridge can be very expensive. Fortunately, there are simple ways to replace these parts yourself. Many manufacturers now offer lifetime warranties on these cartridges. You can check the manufacturer’s website or contact the company directly if you can’t find the replacement parts. In either case, you’ll need to find a faucet repair kit at a home center or hardware store. Just make sure that the cartridge matches the type of faucet.
Performing faucet repair is not difficult. If you’re able to follow simple instructions, you’ll likely save a lot of money on a plumber’s service fee. Moreover, this kind of repair is usually cheaper than other methods, which will save you money in the long run. Then again, if you’re unable to repair your own faucet, you’ll be paying for the labor and parts. So, it’s advisable to hire a professional plumber for such repair.
Usually, a plastic tool is needed to remove the cartridge from a faucet. Afterward, a pair of pliers can be used to grasp the top of the cartridge stem and pull it out of the faucet body. You should notice some water that comes out when you remove the cartridge. If the cartridge is stuck, you can use a plastic tool called a cartridge puller to remove it. A new cartridge can cost as little as $20.
Leaking faucets can waste as much as 200 gallons of water a month, which will add up to a significant spike in your water bill. Fortunately, it’s possible to fix this faucet problem yourself. Regardless of whether you are a do-it-yourselfer or an expert plumber, you’ll likely be happy to know that you can easily repair the problem yourself. In most cases, the repair can be done in the home with basic tools.
Some of the common causes of dripping faucets include clogged aerators, worn-out clips, and leaky valves. While these aren’t the main causes of leaking faucets, it’s best to have a professional plumber check the pipes and aerators before making any repairs. If the problem is more serious, you might need to install a new faucet. If your water pressure has been reduced significantly, it’s time to call a plumber to fix the problem.
